$84.00
The genuine SeaSucker 4.5-Inch Vacuum Mount provides a strong, removable attachment point for suitable smooth, clean, flat and non-porous surfaces.
Its pump-operated vacuum system includes a visible orange vacuum indicator band, allowing the vacuum level to be monitored during use.
Suitable for a range of vehicle, marine, recreational and custom mounting applications when installed and operated in accordance with the SeaSucker Vacuum Mount Owner’s Guide.
SeaSucker 4.5-Inch Vacuum Mount
The SeaSucker 4.5-Inch Vacuum Mount provides a strong and removable mounting point for a wide range of compatible accessories and custom applications.
The vacuum mount uses a pump-operated system to create and maintain vacuum against a suitable smooth, clean, flat and non-porous surface. Its visible orange vacuum indicator band allows the user to monitor the vacuum level during use.
Accessories can be attached using the threaded stainless steel insert or by removing the upper housing and using the mounting slots, depending on the application and load.
Correct surface selection, preparation, installation, monitoring and maintenance are essential to achieving full vacuum performance.
Please read and follow the SeaSucker Vacuum Mount Usage Guide before installation and use.
What's in the Box?
Key Features
Strength and Load Rating
Each individual SeaSucker 4.5-Inch Vacuum Mount has a manufacturer-rated direct-pull strength of 120 lb, approximately 54.4 kg.
SeaSucker also lists a manufacturer load rating of 40 lb, approximately 18.1 kg, under the conditions specified in the SeaSucker Vacuum Mount Usage Guide.
Direct-pull strength and load rating are different specifications. Actual performance depends on the mounting surface, load direction, leverage, installation and application.
The SeaSucker guide notes that its load rating is based on use on the upper side of a horizontally oriented static surface and that leverage or differently oriented loads reduce effective capacity.
Compatibility
This genuine SeaSucker vacuum mount is used as part of the Boss Suction Mount for Starlink Mini.
The complete Boss Suction Mount for Starlink Mini is sold separately.
$330.00Select options This product has multiple variants. The options may be chosen on the product page
$395.00Select options This product has multiple variants. The options may be chosen on the product page
$658.00Select options This product has multiple variants. The options may be chosen on the product page
$390.00Select options This product has multiple variants. The options may be chosen on the product page
SeaSucker 4.5-Inch Vacuum Mount
The SeaSucker 4.5-Inch Vacuum Mount provides a strong and removable mounting point for a wide range of compatible accessories and custom applications.
The vacuum mount uses a pump-operated system to create and maintain vacuum against a suitable smooth, clean, flat and non-porous surface. Its visible orange vacuum indicator band allows the user to monitor the vacuum level during use.
Accessories can be attached using the threaded stainless steel insert or by removing the upper housing and using the mounting slots, depending on the application and load.
Correct surface selection, preparation, installation, monitoring and maintenance are essential to achieving full vacuum performance.
Please read and follow the SeaSucker Vacuum Mount Usage Guide before installation and use.
What's in the Box?
Key Features
Strength and Load Rating
Each individual SeaSucker 4.5-Inch Vacuum Mount has a manufacturer-rated direct-pull strength of 120 lb, approximately 54.4 kg.
SeaSucker also lists a manufacturer load rating of 40 lb, approximately 18.1 kg, under the conditions specified in the SeaSucker Vacuum Mount Usage Guide.
Direct-pull strength and load rating are different specifications. Actual performance depends on the mounting surface, load direction, leverage, installation and application.
The SeaSucker guide notes that its load rating is based on use on the upper side of a horizontally oriented static surface and that leverage or differently oriented loads reduce effective capacity.
Compatibility
This genuine SeaSucker vacuum mount is used as part of the Boss Suction Mount for Starlink Mini.
The complete Boss Suction Mount for Starlink Mini is sold separately.
The SeaSucker 4.5-Inch Vacuum Mount must be installed, inspected, monitored and maintained in accordance with the SeaSucker Vacuum Mount Usage Guide.
Correct surface selection, preparation, positioning and operation of the vacuum mount are essential to achieving full vacuum performance.
The vacuum mount must only be fitted where the complete sealing area can sit correctly against a suitable smooth, clean, flat and non-porous surface.
The orange vacuum indicator band must remain visible to the user so the vacuum level can be monitored during use.
If the orange vacuum indicator band becomes visible, operate the pump again in accordance with the SeaSucker instructions. If the indicator repeatedly becomes visible, discontinue use and inspect the mounting surface and vacuum mount before continuing.
Please read the SeaSucker guide in full before installation and use.
If you have any questions or are unsure whether your mounting surface, accessory or intended application is suitable, please contact Boss Aluminium before use.
Important operating, inspection, maintenance and troubleshooting information for the SeaSucker vacuum mounts. Please read this guide before fitting or using the mount.
The SeaSucker Vacuum Mount is designed for suitable smooth, clean, flat and non-porous surfaces.
Examples may include suitable glass, painted metal, smooth fibreglass and compatible glossy non-porous plastics.
The complete sealing area of the vacuum pad must be able to sit correctly against the surface.
Do not fit the mount to rough, porous, heavily textured, dirty, damaged or uneven surfaces, or where the sealing edge cannot make complete contact.
Always refer to the SeaSucker Vacuum Mount Usage Guide before installation.
Operate the SeaSucker pump until the orange vacuum indicator band is no longer visible.
Position the mount so the indicator remains visible and can be monitored during use.
If the orange vacuum indicator band becomes visible, operate the pump again as instructed. If it repeatedly becomes visible, discontinue use and check the mounting surface and vacuum mount before continuing.
Each individual SeaSucker 4.5-Inch Vacuum Mount has a manufacturer-rated direct-pull strength of 120 lb, approximately 54.4 kg.
SeaSucker also lists a manufacturer load rating of 40 lb, approximately 18.1 kg, under the conditions stated in its guide.
These are different specifications. Performance will vary depending on the mounting surface, load direction, leverage, installation and application.
The SeaSucker vacuum mount includes a threaded stainless steel insert for compatible lighter accessories.
For more substantial accessories, the upper housing can be removed so the accessory can be secured through the slotted mounting holes.
Any accessory must be correctly designed, attached and used within the applicable manufacturer requirements.
If you are unsure whether an accessory or application is suitable, contact Boss Aluminium before use.
Regularly inspect the pump, vacuum pad, sealing edge, housing screws and accessory fasteners.
Keep the vacuum pad and mounting surface clean. Do not use solvents, petroleum-based products or abrasive cleaning materials on the vacuum pad.
Follow the cleaning, lubrication, inspection and storage instructions in the SeaSucker Vacuum Mount Usage Guide.
Yes. This SeaSucker vacuum mount is used as part of the Boss Suction Mount for Starlink Mini.
Customers purchasing the complete Boss system should follow both the Boss Aluminium Suction Mount Fitment Guide and the SeaSucker Vacuum Mount Usage Guide.
Important operating, inspection, maintenance and troubleshooting information for the SeaSucker vacuum mounts. Please read before fitting or using the mount.
View guideFor customers using the SeaSucker vacuum mount as part of the Boss Suction Mount for Starlink Mini.
View guide
