Home / Boss Products
Set up your dual cab for work, touring or both. Planning the tray and canopy together helps you balance enclosed storage, access to equipment and deck space for larger loads.
We manufacture aluminium trays and modular M-Spec canopies in Australia. Choose a package or configure your canopy with compatible shelves and drawers you can rearrange as your needs change. Tell us what you carry, and we’ll help you plan the setup.
01
Start with canopy coverage, then choose under tray storage and compare the package inclusions.
For a dedicated trade body with three-door access, explore our service bodies.
All four M-Spec tray packages include the tray deck, sheet metal headboard, double-skinned tray sides, one-piece mudguards and classic tail infill. Choose the package by the under tray storage you need:
You can also specify options such as a headboard water tank, removable rear hoop or central locking for the boxes and drawer. Compare the full range on our ute trays page.
Our Premium Tray includes a multifunction headboard, underbody boxes with shelving and an under tray drawer. The headboard incorporates work lights, 12V connections and fuel fillers. Compare these inclusions with the M-Spec packages when deciding how much storage and equipment you want in the initial build.
The canopy packages have separate M1–M4 names from the tray packages. We offer them for three-quarter canopies or longer, and we’ll confirm the package for your chosen shell. Each step adds equipment to the previous canopy package:
The fridge surround is the enclosure for the appliance. Specify the fridge and power equipment separately in your quote request. You can also start with a shell and select your own components. Explore our M-Spec canopy range for the full package and component details.
02
Keep straps and recovery gear in rear underbody boxes so you can reach them while the canopy stays packed. When choosing a drawer, check the length of the items you’ll store and leave room behind the ute to open it.
The tray’s integrated tie rail and checker plate deck with M12 nutserts provide tie-down points for loads on the open deck.
The M-Spec framework runs through the canopy walls, floor and ceiling. Our components bolt into it without drilling, giving you options for shelves, drawers and fridge storage within the chosen shell.
Position the tools you use most often near the canopy opening. For touring, plan fridge and pantry access alongside drawer clearance, lighting and 12V equipment.
Our Twin 79 builds show one touring configuration in practice: Premium Trays paired with 1690 mm M-Spec canopies, upright fridge enclosures, pantries, T15 and T10 drawers, and 12V equipment. These vehicles had 300 mm chassis extensions, so use them for layout ideas and discuss fitment for your own ute.
Our Australian-owned family business was established in 2000. Our in-house manufacturing in Melbourne includes CAD design, laser cutting, robotic bending and powder coating. We back our workmanship with a lifetime warranty. Confirm warranty cover for other supplied equipment in your quote.
03
Compare our tray sizes below for mid-sized dual cab utes and standard or extended 79 Series chassis. We’ll confirm the configuration for your vehicle.
| Tray Configuration | Length | Width |
|---|---|---|
| M-Spec: Mid-Sized Dual Cab | 1800 mm | 1850 mm |
| M-Spec: Dual Cab 79 Series | 1800 mm | 1850 mm |
| M-Spec: Dual Cab 79 Series + 300 mm Extension | 2100 mm | 1850 mm |
| Premium: Mid-Sized Dual Cab & Standard Dual Cab 79 Series | 1800 mm | 1850 mm |
| Premium: Dual Cab 79 Series + 300 mm Extension | 2000 mm | 1850 mm |
Dimensions are length × width for the configurations above. Send us your model year, trim and any chassis modifications so we can discuss the tray and canopy fitment for your vehicle.
Allow for the weight of the tray, canopy and accessories, plus your tools, water, spare wheels and fridge. Request current weights for the selected configuration to plan your complete load.
We can discuss camera and sensor integration, mounting requirements and fitting work for your model and trim. Front underbody boxes also require suitable chassis space, so their availability needs to be assessed for your vehicle.
Our HQ, showroom and warehouse are at 7 Southfork Drive, Kilsyth South, Victoria. For other locations, contact us about an authorised dealer and the tray, canopy and fitting services available there.
Send us your make, model, year and trim, plus details of the current tray or tub and any chassis modifications. Include the tools, camping equipment and larger loads you carry. If you haven’t chosen a package, we can discuss the layout with you.
Price depends on the tray range, canopy size, package and optional equipment. Request a quote for your vehicle and selected layout, and check whether it includes GST, fitting, delivery and any work to remove the existing tub or tray.
Our mid-sized dual cab and standard dual cab 79 Series trays measure 1800 × 1850 mm. For a dual cab 79 Series with a 300 mm chassis extension, the M-Spec tray is 2100 × 1850 mm and the Premium Tray is 2000 × 1850 mm. Confirm fitment for your exact vehicle before ordering.
Send us your existing tray’s dimensions, mounting details and photos. We’ll check the requirements for the canopy configuration you’re considering before confirming compatibility.
Yes. You can rearrange compatible Boss shelves, drawers and other bolt-in components as your storage needs change. Check the space and component compatibility for your canopy shell before adding equipment.
Timing depends on the products selected, vehicle availability and the production schedule. Contact us with your vehicle details and preferred configuration for the current lead time.
Visit our finance page to explore finance options for your dual cab build. The finance provider will confirm product eligibility, approval, rates and terms.
